N Female Clamp type

AED0.00
In stock
Product Model
N FEM CLM-XXX
N TYPE is low to medium power connector with screw coupling mechanism. The characteristic impedance is 50 Ohms. Main advantages of this connector are high reliability, great vibration performance, excellent mechanical and electrical performance etc. By using Semi Flex or semi-rigid cables, N type will have lower VSWR and frequency range can be extended up to 11 GHz. This type is most widely used in Radio communication equipment, microwave test and ground launch systems, and electronic instruments.
N TYPE is low to medium power connector with screw coupling mechanism. The characteristic impedance is 50 Ohms. Main advantages of this connector are high reliability, great vibration performance, excellent mechanical and electrical performance etc. By using Semi Flex or semi-rigid cables, N type will have lower VSWR and frequency range can be extended up to 11 GHz. This type is most widely used in Radio communication equipment, microwave test and ground launch systems, and electronic instruments.
More Information
Technical specification
N FEM-CLM-58
N Female Clamp Type for RG-58
Body: Brass with Ni Plating,Pin: Gold Plated,Impedance: 50Ω
 
N-FEM-CLM-213
N Female Clamp Type for RG-213
Body: Brass with Ni Plating,Pin: Gold Plated,Impedance: 50Ω
 
N-FEM-CLM-400
N Female Clamp Type for TMR-400
Body: Brass with Ni Plating,Pin: Gold Plated,Impedance: 50Ω
 
Technical Characteristics N CONNECTORS
Impedance 50Ω
Frequency DC-11 GHz
Contact resistance Center ≤1 mΩ
Outer ≤ 1 mΩ
Insertion loss Straight ≤ 0.30 dB Right angle ≤ 0.60 dB
VSWR Straight ≤ 1.15 / 6 GHz
Right angle ≤ 1.25 / 6 GHz
Insulation Resistance ≥ 1500 MΩ
Working Voltage 1000 Vrms
Withstand voltage 2500Vrms
Center Conductor Retention force ≥ 0.56 N
Coupling Nut Retention Force ≥ 450 N
Durability 500 (cycles)
Vibration 100m/s2 (10-500 Hz) 10g
Working Temp Range -55 ~ 155°C
Material and Plating  
Body Part Material PLating
Body Brass (Gold Nickel Plated    ies)
plated-GGT Ser
Contact pin Brass/Phosphorus Bronze Gold or Silver Plated
Socket contact Beryllium copper Gold or Silver Plated
Insulator PTFE -
Crimp Ring Copper Alloy Nickel plated (Gold plated- GGT Series)
O ring Sealing 6146 Silicone rubber -
 
Applicable standard
IEC-60169-16 (For reference only*), MIL-C-39012 (For reference only*)
*- These standards are quoted for reference only. It does not mean that the products offered below are
complied with these standards. For connectors to match with the respective standards-Astel Digicom will
specifically mentioned with the connector.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifica-
4. E&OE (Errors and Omissions are excepted).
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible
for any loss, directly or indirectly caused by any error in publishing.