BNC Male Adapters

AED0.00
In stock
Product Model
BNC MAL - BNC-XXX
BNC Connector uses Bayonet lock mechanism for coupling or connection,and is often used in Radio Signal connection with frequency under 4GHz. It is widely used in network systems, instrument panels, meter and internet.
BNC Connector uses Bayonet lock mechanism for coupling or connection,and is often used in Radio Signal connection with frequency under 4GHz. It is widely used in network systems, instrument panels, meter and internet.
More Information
Technical specification
BNC MAL-F FEM-BR
BNC Male to F Female
Body: Brass with Ni Plating,Pin: Gold Plated,Impedance: 75Ω
 
BNC MAL-RCA-FEM-BR
BNC Male to RCA Female
Body: Brass with Ni Plating,Pin: Gold Plated,Impedance: 75Ω
 
BNC MAL -BNC FEM-RA /FEM-T2
BNC Male to BNC Female Right Angle Type / T Type
Body: Brass with Ni Plating,Pin: Gold Plated,Impedance: 75Ω
 
Technical Characteristics
BNC CONNECTORS
Impedance
75Ω and 50Ω
Frequency
DC-4 GHz
Contact resistance
Center ≤ 1.5 mΩ
Outer ≤ 1.0 mΩ
Insertion loss
≤ 0.20 dB / 3 GHz
VSWR
Straight ≤ 1.22 / 1 GHz
Right angle ≤ 1.30 / 1 GHz
Insulation Resistance
≥ 5000  MΩ
Working Voltage
335 Vrms
Withstand voltage
1000Vrms
Center Conductor Retention force
≥ 0.28 N
Durability
500 (cycles)
Working Temp Range
-40 ~ 85°C
Material and Plating
 
Body Part
Material
PLating
Body
Brass
Nickel Plated
Contact pin
Brass
Gold or Silver Plated
Socket contact
Beryllium copper
Gold or Silver plated
Insulator
PTFE
-
Crimp Ring
Copper Alloy
Nickel Plated
O ring Sealing
6146 Silicone
-
 
Applicable standard
IEC-60169-8 (For reference only*)
MIL-C-39012 (For reference only*)
*- These standards are quoted for reference only. It does not mean that the products offered below are
complied with these standards. For connectors to match with the respective standards-Astel Digicom will
specifically mentioned with the connector.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifica-
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for any loss, directly or indirectly caused by any error in publishing.
4. E&OE (Errors and Omissions are excepted).