FTTH Cable 2C Single Mode Bend Insensitive Outdoor

AED450.00
In stock
Product Model
FTTH-2C-OD
The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate material is applied over fiber cladding as optical fiber primary protective coating. The detail data of optical fiber performance are shown in the following table.
The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate material is applied over fiber cladding as optical fiber primary protective coating. The detail data of optical fiber performance are shown in the following table.
More Information
Technical specification
Optical Fiber
 
1) The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate material is applied over fiber cladding as optical fiber primary protective coating. The detail data of optical fiber performance are shown in the following table.
2) The performance of cable single mode optical fiber (ITU-T Rec. G.657.A).
 
Application
 
1) Indoor level and vertical laying.
2) Ceiling laying, surface laying etc.
3) Connected to connectors of various models interconnect.
 
Item
Unit
FTTH-2C-OD-2G657A2
Fiber count
 
2
Fiber type
 
G.657A2
Strength Member material
 
FRP
Strength Member diameter
mm
Ф0.5mm x 2 pcs
Outer Sheath material
 
LSZH
Messenger Wire
mm
1.0
Cable Size
mm
5.2±0.2 x 2.0±0.1
Radius Short Term
-
≥20×Cable Diameter
Radius LongTerm
-
≥10×Cable Diameter
Operation temperature range
ºC
-40 ~ +60
Installation temperature range
ºC
-20 ~ +50
Storage temperature range
ºC
-50 ~ +70
Max. tensile load
N
600
Crush resistance
N
2000/10cm
 
Packaging
ASTEL FTTH Cables are coiled on wooden drum. During transportation, cables should be protected from moisture; kept away from high temperature and fire sparks; protected from over bending and crushing; protected from mechanical stress and damage.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifications.
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for
any loss, directly or indirectly
caused by any error in publishing.
4. E&OE (Errors and Omissions are excepted)