Industrial Power Supply DIN Rail Mount type

AED225.00
In stock
Product Model
AST-IMC-PSU-48V-2.5A (DR-120-48)
PRODUCT DESCRIPTION:
AST-IMC-PSU-48V-2.5A (DR-120-48) are a reliable solution for Industrial Media Converters that
run on a +48 VDC power input. It can operate reliably in temperatures ranging from -40°C
to 70°C. It is feature rich and has built in over voltage, over current, short circuit and over
temperature protection.
 
Main Features:
1) Industrial Grade Power supply
2) DIN Rail mountable TS-35/7.5 or 15
3) AC input range 90-264VAC
4) SMPS type High Efficiency
5) Protections: Short Circuit / Overload / Over Voltage / Over Temperature
6) LED Indicatory for Power on
7) 100% Full load burn in test
8) 1 year warranty
9) Cooling by free air convection
More Information
Technical specification
SPECIFICATIONS: 
Product Name AST-IMC-PSU-48V-2.5A (DR-120-48)
OUTPUT  
DC Voltage 48V
Rated Current 2.5A
Current Range 0-2.5A
Rated Power 120W
Ripple & Noise (max.) Note.2 <100mVp-p
Voltage Adj. Range 47 -56VAC
Voltage Tolerance Note.3 ±1.0%
Line Regulation ±0.5%
Load Regulation ±1.0%
Output Start time <2s @ 230VAC @ Full Load
Hold Up Time (Typ.) <50ms/230VAC at full load
INPUT  
Voltage Range 94 - 264VAC
Frequency Range 47 - 63Hz
Efficiency (Typ.) >90% @ 115 VAC, >91% @ 220VAC
AC Current (Typ.) 2.20A/115VAC 1.10A/230VAC
Inrush Current (Typ.) COLD START 35A/15VA & 230VAC
Leakage Current <3.5mA/ 240VAC
PROTECTION 
Overload 120 -150% rated output power Protection type : Swing Machine, self recovery automatically after fault condition is removed
Over Voltage 57 - 70V Protection type : Protection type: Swing Machine self recovery after fault condition is removed
Short Circuit  Short Circut Protection, Self recovery to normal after removeing the short circut.Protection type: shutdown o/p voltage, recovers automaticaly after temperature goes down 
ENVIRONMENT 
Working Temp -30 - +70°C (Refer to “Derating Curve”)
Working Humidity 20 - 95% RH non-condensing
Storage Temp., Humidity -40 - +95°C, 10 - 95% RH
Temp. Coefficient ±0.03%rc (0 - 50°C)
Vibration 10 - 500Hz, 2G 10min./1cycle, 6 Cycles. each along X, Y, Z axes;Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4) 
Safety Standards GB4943, TUV EN60950-1 approved
Withstand Voltage

I/P-O/P: 3KVAC/10mA, I/P-F/G: 1.5KVAC/10mA O/P-FG:0.5KVAC/10mA

Isolation Resistance I/P-O/P, I/P-FG, 0/P-FG:100M Ohms / 500VDC / 25°C/
EMC Emission

Compliance to EN55024 EM55022 (CISPR22) Class B,

FCC Part 15 Class B

EMC Immunity Compliance to EN61000-3-2,-3,-4,-5,-6,-8,-11,  EN61000-6-2 (EN50082-2), heavy industry level,criteria EN61000-3-2,70% RH
Others 
MTBF 100,000 hrs min. MIL-HDBK-217F (25t)
Dimension 135*121*140mm (W*H*D)
Packing 0.79Kg; 20pcs/16.5Kg/1.29CUFT
 
*Notes:
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of
ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with
a 0 luf & 47uf parallel capacitor
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment.