FLAT ELEVATOR CABLE DUAL JACKET UTP CAT6 COPPER

AED0.00
In stock
Product Model
FECUTPCAT6BC
ASTEL Flat Elevator Cables are designed and manufactured to Ultra flexibility demand of CCTV Cameras in Elevator applications. ASTEL FEC UTP CAT6 BC has Stranded Copper as a center conductor with HDPE Insulation and Dual jacket. It has two GI Steel Strength members on either side of the center conductor. All the cores are protected with Ultra Flexible PVC Jacket for repeated bending and traveling of elevators.
ASTEL Flat Elevator Cables are designed and manufactured to Ultra flexibility demand of CCTV Cameras in Elevator applications. ASTEL FEC UTP CAT6 BC has Stranded Copper as a center conductor with HDPE Insulation and Dual jacket. It has two GI Steel Strength members on either side of the center conductor. All the cores are protected with Ultra Flexible PVC Jacket for repeated bending and traveling of elevators.
More Information
Technical specification
Applications:
Elevator traveling cable for indoor and panoramic elevators
IPC Cameras in Elevators
Video Monitoring in Cranes
Support All CAT6/Class E applications (10BaseT, 100Base-T, 1000Base-T, ISDN
Maximum channel length 65m (transceiver to receiver)
 
 
Model Product FEC UTP CAT6 BC-A FEC UTP CAT6 BC-A +2DC10
Cable Description  Flat Flexible Elevator CableUTP CAT6 – Design A  Flat Flexible Elevator Cable UTPCAT6 with Power- Design A
 Conductor  Bare Copper Stranded  Bare Copper Stranded
 Conductor Structure  4 x 2 x 7*0.2  4 x 2 x 7*0.2
 Conductor Cross Section Area  0.22 mm2  0.22 mm2
 Insulation thickness  0.79 mm  0.79 mm
 1st Jacket Dia  4.50 mm  4.50 mm
 1st Jacket Thickness  0.50 mm  0.50 mm
 Overall Jacket  Ultra Flex PVC  Ultra Flex PVC
 Overall Jacket Size  15.5x7.90mm  17.3 x 7.9 mm
 Minimum Jacket thickness(in ends)  6.3 mm  6.3 mm
 Maximum Jacket thickness(in center)  7.9 mm  7.9 mm
 Overall Jacket Color  Grey  Grey
 Power Cable    
 Conductor  -  Bare Copper
 Conductor Structure  -  2x32x0.2
 Conductor Size mm2  -  1.00mm2
 Strength Wires    
 Material GI Steel Wires Stranded
and compacted
GI Steel Wires Stranded
and compacted
 Construction    
 Conductor Size  1.00 mm2  1.00 mm2
 Electric Specifications    
Pair to Pair  100V  100V
 Pair to Outer Jacket  150V  150V
 Conductor Resistance (max)  270 Ohms /KM  270 Ohms /KM
 Impedance  100±15 ohms  100±15 ohms
 Capacitance  43 pf/m 43 pf/m
 Flame Propagation  Complies with IEC /
EN 60332-1-2
 Complies with IEC /
EN 60332-1-2
 Mechanical Specifications    
 Free Suspension length  Max 45 meter  Max 45 meter
 Lifting Height (tied with cable
ties at specified intervals)
 Max 150 meter  Max 150 meter
 Operating Temp  -15°C to+70°C  -15°C to+70°C
 Sheath Tensile Strength
before aging
 ≥ 10.0 N/mm2  ≥ 10.0 N/mm2
 Sheath Elongation before aging  ≥ 300%  ≥ 300%
 Packing-1  100m  100m
 Weight each Reel  14.30 Kg  17.50 kg
 Packing-2  200m  200m
 Weight each Reel  25.0 kg  25.0 kg
Packing-2 300m 300m
Weight each Reel 38.5 50.5 kg
 
Installation Notes:
All Models
Flexible cable should be tied with the cable rope by using high tensile cable ties at a gap of every 10 cm.
When fixing the connectors, please give five loops of cable atleast with 20 cms diameter and then fix the metal shielded RJ45 Connector.
Metal Shielded connector should be with Boot and can be directly plugged in the IPC.
 
Technical Notes
All Models
DC resistance changes at the rate of 0.393% /ºC.
Sequential meter marking on all cables.
Higher core sizes cables also available
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size, which may appear in product specifications.
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for
any loss, directly or indirectly caused by any error in publishing.
4. E&OE (Errors and Omissions are excepted)