DIN Male Adapter

AED0.00
In stock
Product Model
DIN MALE-DIN MALE
7/16 DIN is medium to high power connector with screw coupling mechanism. The characteristic impedance is 50 Ohms and 75 ohms. Main advantages of this connector are high Power, low VSWR, less attenuation, low intermodulation and excellent airtight capability. reliability, great vibration performance, excellent mechanical and electrical performance etc. By using Heliax or Feeder cables, 7/16 connectors are used in Television Broadcast, FM Broadcast, Radar Monitoring, ground Launch system, microwave communication.
7/16 DIN is medium to high power connector with screw coupling mechanism. The characteristic impedance is 50 Ohms and 75 ohms. Main advantages of this connector are high Power, low VSWR, less attenuation, low intermodulation and excellent airtight capability. reliability, great vibration performance, excellent mechanical and electrical performance etc. By using Heliax or Feeder cables, 7/16 connectors are used in Television Broadcast, FM Broadcast, Radar Monitoring, ground Launch system, microwave communication.
More Information
Technical specification
DIN MALE-DIN MALE
DIN Male to DIN Male Jointer
Body: Brass with Nickel Plating
Pin: Silver Plated
Impedance: 50Ω
 
Technical Characteristics 7/16 DIN (L29 TYPE)
Impedance 50Ω
Frequency DC-7.5 GHz
Contact resistance Center≤ 0.40 mΩ
Outer≤ 1.50 mΩ
Insertion loss ≤0.24 dB
VSWR Straight ≤ 1.20 / 6 GHz
Right angle  ≤ 1.35 / 6 GHz
Insulation Resistance ≥ 10000 MΩ
Working Voltage 2700 Vrms
Withstand voltage 4000Vrms
Center Conductor Retention force ≥ 6.0 N
Durability 500 (cycles)
Vibration 100m/s2 (10-500 Hz) 10g
Working Temp Range -55 ~ 155°C (-40~85°C) for PE
Material and Plating  
Body Part Material Plating
Body Brass CUSNZN3 Plated or Silver
Contact pin Brass Gold or Silver
Socket contact Beryllium copper Gold or Silver
Insulator PTFE -
Crimp Ring Copper Alloy Nickel plated (Gold plated- GGT Series)
O ring Sealing 6146 Silicone rubber -
 
Applicable standard
IEC-60169-12 (For reference only*)
*- These standards are quoted for reference only. It does not mean that the products offered below are
complied with these standards. For connectors to match with the respective standards-Astel Digicom will
specifically mentioned with the connector.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifica-
3. E&OE (Errors and Omissions are excepted).
4. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for any loss, directly or indirectly caused by any error in publishing.