Breakout Fiber Optic Cable

AED0.00
In stock
Product Model
FOC-BC-XX-YY
1) These are indoor cables with higher tensile, strength and crush resistance.
2) Single-cable with independent strength member.
3) Fiber Count: 2~12.
4) These cables have dual jacket for higher mechanical strength.
1) These are indoor cables with higher tensile, strength and crush resistance.
2) Single-cable with independent strength member.
3) Fiber Count: 2~12.
4) These cables have dual jacket for higher mechanical strength.
More Information
Technical specification
Application
 
1) Indoor level and vertical laying.
2) Ceiling laying surface laying etc.
3) Connected to connectors of various models interconnect.

Technical Parameters
Cable
Count
Outer sheath
Diameter (MM)
Inner sheath
Diameter (MM)
Weight
(KG)
Minimum allowable
Tensile Strength (N)
Minimum allowable
Crush Load
(N/100mm)
Minimum
Bending Radius (MM)
Short term
Long term
Short term
Long term
Short term
Long term
4
7.5
2
47
1500
600
1000
300
20D
10D
 
Jacket options
 
Inner Jacket material: LSZH.
Outer Jacket Material: LSZH with Rodent Protection.
YELLOW: SMF G652D.
ORANGE: OM1 62.5/125um.
AQUA: OM3 50/125um.
AQUA: OM4 50/125um.
Outer Jacket material: TPU with Anti Crush properties in black color only.
 
Note: Fiber attenuation for tight buffer cables is little higher than bare fibers.
Note 2: For more detailed specification on Fiber Core Characteristics, please write to us at asteldigicom@eim.ae or visit fiber core manufacturer’s website.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifications.
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for any loss, directly or indirectly caused by any error in publishing.
4. E&OE (Errors and Omissions are excepted)