Single Mode Optical Fibre Cable with Dual Sheath

AED0.00
In stock
Product Model
GYFTY53-XX
Packing Each single length of cable shall be reeled on Fumigated Wooden Drum suitable for long distance shipment. Covered by plastic buffer sheet. Sealed by strong wooden battens. At least 1 m of inside end of cable will be reserved for testing. Drum length. Standard drum length is 2000m±3%; Single length not less than 95% of standard length per drum shall be permitted for quantity not exceeding 10% of the total supply. Total quantity is at least the ordered quantity.
Packing Each single length of cable shall be reeled on Fumigated Wooden Drum suitable for long distance shipment. Covered by plastic buffer sheet. Sealed by strong wooden battens. At least 1 m of inside end of cable will be reserved for testing. Drum length. Standard drum length is 2000m±3%; Single length not less than 95% of standard length per drum shall be permitted for quantity not exceeding 10% of the total supply. Total quantity is at least the ordered quantity.
More Information
Technical specification
Main Features
 
1) There are two models 5 Tube Model (for 12-60 Fibers) and 6 Tube Model (For 36 Fibers to 72 Fibers). WE also have 8 Tube and 12 2) Tube Models upto 144 Fiber.
3) Number of Tubes means total number of tubes and fillers. e.g. For a 5 tube model it can be 2 Tubes and 3 Fillers or 3 Tubes and 2 fillers. Total number remains 5.
4) The number of tubes depends on the number of fibers.
 
Technical Specifications
Model
Unit
GYFTY53-XX
Fiber Count
 
F<24
24<F<72
72<F<144
Tubes + Fillers
 
5
6
12
Outer Dia
cm
10.3
10.50~13.0
13.1~16.00
Nominal Weight
Kg/Km
110
125~175
175~260
Tensile Load (N)
 
 
 
 
Short Term (See Note 1)
N
1500
1500~2000
2000
Long Term (See Note 1)
N
600
600
600
Min Bending Radius
 
 
 
 
Installation
 
20D
20D
20D
Static
 
10D
10D
10D
Max Crush Resistance
 
 
 
 
Short Term (See Note 1)
N/100mm
3000
3000
3000
Long Term (See Note 1)
N/100mm
2000
2000
2000
 
Note 1: Fiber attenuation for tight buffer cables is little higher than bare fibers.
Note 2: For more detailed specification on Fiber Core Characteristics, please write to us at asteldigicom@eim.ae or visit fiber core manufacturer’s website.
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifications.
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for
any loss, directly or indirectly
caused by any error in publishing.
4. E&OE (Errors and Omissions are excepted)