PoE INJECTOR 30W

AED110.00
In stock
Product Model
AST-802G-PoE-INJ-30W

PRODUCT DESCRIPTION:

AST-PoE-INJ-30W-2P is single port Gigabit PoE injector with 2X RJ45 ports, one is input port with Ethernet data, second is output port with power and data. Because of the injector itself has no data switching forward function, so it needs to work with network switch. The device can carry power to PD Devices with IEEE803.3af/at standard, such as router, switch, wirelessAP, VoIP, Industrial network terminal equipment, IP Camera. It meets the needs of remote places which are without power.

MAIN FEATURES:

Input power is overvoltage & undervoltage protected.
Output overvoltage, output overcurrent & short circuit protection function.
Lightning Protection - AC input sustain differential mode 2KV common mode 6KV, 8/20uS Inpulse
current waveform positive and negative each five times, each time interval 1 minute.
Lightning Protection - PSE control segment, sustain differential mode 2KV, common mode 6KV, 10/700uS
inpulse current
Power supply lightning protection circuit has failure alarm function and protective safety protective
components.

More Information
Technical specification
  Technical Specifications
Model AST-802G-PoE-INJ-30W
Input Power 1 ×AC
Voltage Range 90-280V AC
Data Input Interface 1 ×R J 4 5
PoE Output Interface 1 ×R J 4 5
Output Power ≤30 W
Output Voltage 46-52VDC
Output Ripple ≤ 5%
The network protocol & compatible standard
IEEE802.3i 10 BASE-T,
IEEE802.3i 100 BASE-TX,
IEEE802.3x flow control,
IEEE802.3af /IEEE802.3at
Transmission Line 2-Pair Cat 5e/6/7
Power Line Pins Pair 1: 1,2 ( + ) & 3,6 ( - )
Transmission Rate 10/ 100M / 1000Mbps
Transmission Distance 100m (Max.)
Installation Plug and play Automatic detection and provide the output for PD Equipment
LED Indicator Link, Speed ,PoE active, PoE error
ESD 8KV, Level 3 as per IEC61000-4-2
Lightning Protection 6KV Level 3 as per IEC61000-4-5
Dimensions 165mmx62mmx38.5mm
Operation Temperature 0°C ~ 40°C
Storage Temperature - 10°C ~ 70°C
Humidity(non-condensing) 20 ~ 85%
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifications.
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not
responsible for any loss, directly or indirectly caused by any error in publishing.
4. E&OE (Errors and Omissions are excepted).